NTI Video Matrix Switch 8 Signals In 8 Out

SM-8X8-15V-LCD

$2,055.00$1,889.66
Save $165.34

Discontinued
Replaced by: Network Technologies SM-8X8-15V-LC
Alternative options: Contact Us

The NTI VEEMUX SM-8X8-15V-LCD video matrix switch routes video from many computers to multiple displays (projectors, monitors, etc.) This switch can drive standard VGA cables, thus eliminating the need for external interfaces and coax cble connections via BNC connectors.

Signals from a range of input sources can be distributed to various output devices, in essence creating a "matrix" pattern of interconnection possibilities. A single computer video output can be routed to one or more monitors. Each image will be as crisp and clear as if directly connected to the original source. Each video output is buffered from each input, insuring signal integrity throughout the system.

NTI SM-8X8-15V-LCD Features & Applications:

  • Configure and control the switch through Ethernet, serial port or front panel buttons.
  • Control switching via optional Infrared remote control.
  • Matrix Control Software with Graphical User Interface (GUI control) is included with the product.
  • Equipped with Liquid Crystal Display (LCD) for front panel operation.
  • Switch VGA video directly.
  • Each output provides one video signal.
  • Each input can be independently connected to any or all outputs.
  • Video bandwidth is 200 MHz or greater.
  • Supports 1900x1200 video resolution at a refresh rate of 85 Hz.

The NTI SM-8X8-15V-LCD switch is the ideal solution for any application where information from many computers is being presented, such as:

  • Classrooms.
  • Boardrooms.
  • Trade shows.
  • Conference and entertainment facilities.
  • Courtrooms.
  • Command centers.
  • Control rooms.

NTI SM-8X8-15V-LCD Specifications:

Mechanical  
Height 1.75 in. (4.45 cm.)
Width 19 in. (48.26 cm.)
Depth 12 (30.48 cm.)
Weight 7 Lbs. (3.18 kg.)
Environmental  
Operating Temperature 32°F to 100°F (0°C to 38°C)
Storage Temperature -20°F to 140°F (-30°C to 60°C)
Relative Humidity 17 to 90% non-condensing RH
Power  
Supply 110 or 220 VAC at 50 or 60 Hz.
Consumption 15W
Video Input  
Eight female 15-pin HD connectors.
Impedance: 75 Ohms.
Video Output
Eight female 15-pin HD connectors.
1900x1200 video resolution with no degradation.
Impedance: 75 Ohms.
Bandwidth: 200 Mhz, fully loaded.
Cables Interface cables between the computers and the switch are required for proper operation.
Cables not included.
MTBF 88,120 hrs.
Regulatory Approvals CE, FCC
Question: Hello I am using this model and have a fault where the centre half the display is missing I understand that this model is superseded by the LC model but as its only the display that is faulty is there a part number for a replacement LCD module
Answer: Thank you for your inquiry. Unfortunately, we do not sell replacement parts for these systems. However, a replacement LCD may be available from the manufacturer. You can contact Network Technologies Incorporated directly from the following page: http://www.networktechinc.com/contact.html.