NTI 2-port USB, DVI,  KVM Switch

The NTI UNIMUX-DVI-2 is a DVI USB 2 port KVM Switch. IThe UNIMUX DVI USB KVM Switch allows you to control two single link DVI USB computers with one DVI monitor, USB keyboard and USB mouse.

NTI UNIMUX-DVI-2 Features:

• Incorporates NTI's patented true autoboot USB switching - all attached USB PCs, SUNs and MACs can be booted simultaneously.
• Up to 1600x1200 video resolution.
• Fully compliant with USB (1.0, 1.1) standards.
• USB SUN start-up keys are supported.
• Supports MAC soft (keyboard) power-on.
• SUN extra keys are emulated on USB keyboards with Windows keyboard layouts.
• Supports DVI interface for crisp and clear video quality on Flat Panel Display.
• Front-panel push button and hotkeys for channel selection.
• LED indicators on switch show which port is active.
• Auto Scan computers to catch system failures early.
• Rugged metal enclosure.

Built-In Control Methods:

Front Panel Interface

• LEDs indicate currently selected port and mode of operation.
• Hold in any button for more than five seconds to go into Scan, Broadcast or Command Mode.
  • In Normal Operating Mode, the user can directly operate the selected computer with transparent presence of the NTI switch.
  • Scan Mode automatically and sequentially displays the video from each powered on computer for 2-255 seconds.
  • Broadcast Mode allows the user's keystrokes to be sent to both powered on computers. (Broadcast Mode is not available for MACs.)
  • Command Mode allows the user to give instructions to the switch through his/her keyboard. Keystrokes are not passed to the computer.

Keyboard

• Scan or Command Modes are available from the keyboard using hot keys.
• Use the keyboard to command the switch box to select ports or configure the Scan delay.
• Type +<'> (or +<'>) to go into Command Mode.
• Press to leave Command Mode and return to Normal or Scan Mode.

 NTI UNIMUX-DVI-2 Application Diagram

 NTI UNIMUX-DVI-2 Specifications: