Gefen HDTV DVI-D Fiber Optic Cable, 150ft M-M
CAB-HDTV-150MM
Save $341.63
Discontinued
For upgrade or replacement options: Contact Us
Length: 150 ft
Connectors: Single-Link DVI-D (Digital) Female-to-Female (connect Male to Male)
Color: Blue
Compliance: HDCP, RoHS
Clearance: 1.5" (3.81 cm) wide conduit
Warranty: 2 Year Limited Warranty
Gefen CAB-HDTV-150MM is an active 150 foot long male-to-male DVI-D fiber optic cable solution designed for reliable high performance 1080p HDTV (HDCP Compliant) and 1920 x 1200 PC video extension over long distance. The Gefen HDTV Extreme Fiber Optic series integrates DVI connectors, fiber optic components, and the DDC / EDID signals into one compact cable that exceeds the performance of traditional copper- and silver-based cables by reducing EMI interference. When compared to traditional DVI Extenders, this integrated Fiber Optic DVI cable provides ease of installation, increased reliability by eliminating points-of-failure, and better performance by eliminating interference from interconnections. CAB-HDTV-150MM can be bus-powered through the DVI connector or via the included power supply when the video source has insufficient power to drive the 5V signal lines within the cable.
- HDTV Resolution Support: HDTV Extreme Cables support resolutions up to 1080p (including: 1080i, 720p, 480p, 480i).
- HD Computer Resolution Support: HDTV Extreme Cables support computer resolutions up to 1920x1200.
- Power-On-Line (PoL): Bus-powered through the DVI connector or via the included power supply which is used when the video source has insufficient power to drive the 5V signal lines within the cable.
- Higher Performance: Exceeds the performance of traditional DVI Cables and DVI Extenders by reducing the EMI (Electromagnetic-Interference).
- Durable Design: Fungus-resistant, water resistant, and UV-resistant assembly that can meet the rigors of most installation and operating environments (*suitable for both indoor and outdoor use).
- HDCP Compliant: Fully supports High-bandwidth Digital Content Protection scheme for HDCP devices such as projectors, Blu-ray players, video game systems, and satellite TV boxes.
- RoHS Compliant: Designed to restrict use of ten hazardous substances commonly used in electronic and electronic equipment, such as Lead, Mercury, and Cadmium.
- Gefen HDTV Extreme Fiber Optic DVI Series: Single Link Fiber based DVI cables are available in lengths of 50 feet & 150 feet (this product).
- Per the vendor, all sales for this product are final; no returns accepted.
NOTE:
- Requires clearance of a 1.5" (3.81 cm) wide conduit.
- *Although the cable is suitable for both indoor and outdoor use (fungus-resistant, water-resistant and UV-resistant), the cable ends must be kept clear of moisture and contaminants. If dust/dirt contaminants are an issue, enclose the entire end connector in a plastic bag.
- Gefen DVI Extreme Fiber Optic Cables are not designed for permanent in-wall installation - Please Contact Us for an Extender to use in permanent in-wall installation.
- This cable is a replacement for the Gefen CAB-DVIC-DLBN-150MM, CAB-DVIC-DLBN-60MM, CAB-DVIC-DLB-60MM, and CAB-DVIC-DLB-150MM cables.
HDTV Extreme DVI Cable Usage Guidelines
The HDTV Extreme DVI extension cables are robust assemblies that can meet the rigors of most installation and operating environments. Although outwardly similar in appearance to copper DVI cables, the HDTV Extreme cable is a hybrid of copper conductors and glass optical fibers with complex electro-optical circuits embedded in the connector ends. If common sense handling is used in the deployment of the cable, then many years of fault-free operation can be anticipated. The following guidelines will assist in the installation and operation of the HDTV Extreme cable.
- Unlike a copper cable, the HDTV Extreme cable is polarized - that is, the Sender end must be connected to the video source and the Receiver end must be attached to the video peripheral.
- A 5V DC power supply is included. In normal scenarios, the source outputs the 5V needed to power the cable. If a sufficient 5V is not present, the included 5V DC 1 Amp power supply must be connected to either the send or receive side of the HDTV Extreme cable.
- Although the cable is suitable for both indoor and outdoor use (fungus-resistant, water-resistant and UV-resistant), the cable ends must be kept clear of moisture and contaminants. If dust/dirt contaminants are an issue, enclose the entire end connector in a plastic bag.
- The cable is durable and can withstand 1,500 impacts with a crush resistance of 1,800 N/cm with a flex resistance of 2,000 cycles. But it is not designed to be operated in an environment where continuous flexing is applied to the cable.
- The cable must not be subject to extreme bends during installation or while in operation. As a rule, the minimum bend diameter should be no less that 5" (13cm) - or in more familiar terms, the bend/curve of the cable should be no tighter than the outside perimeter of a standard Compact Disc (CD).
- During installation in conduit or through restrictive spaces, a minimum allowance of 1.75" x 0.75" (4.4cm x 1.9cm) for the end connector must be allowed. Be sure the Sender and Receiver connectors are clearly identified before installing the cable.
- During the pulling of cables, axial force must never be applied to the connector. Pulling must be done using a proper cable aid that applies the force along the jacket of the cable itself. Plastic boots must at a minimum be used to protect the DVI pins. If dust/dirt contaminants are an issue, enclose the entire end connector in a plastic bag.
- The operating temperature of the cable itself is -40° to +85°C (-40°F to +185°F), but the recommended operating temperature at each end of the cable assembly is 0°C to +50°C (+32°F to +122°F), not unlike the operating conditions of the equipment that is connected.
Gefen DVI Extreme Fiber Optic Cables are not designed for permanent in-wall installation - Please Contact Us for an Extender to use in permanent in-wall installation.
UPC 845344020259
EAN 0845344020259
