Avocent 10ft USB CAT 5 integrated access cable
USBIAC2-10
Save $25.59
Discontinued
For upgrade or replacement options: Contact Us
Avocent USBIAC2-10 is a 10ft USB CAT 5 integrated KVM access cable designed to reduce cable bulk. Use the USBIAC2-10 cable to convert keyboard, monitor and mouse signals from a server through a single integrated CAT 5 cable to your switch. The USBIAC2-10 cable draws its power from the server and has Keep Alive functionality that will keep your server working properly with or without connectivity to the Avocent KVM switch or serial console switch. The USBIAC2-10 supports USB 2 peripheral devices (Virtual media & Smart card/CAC) on Avocent Mergepoint KVM switches.
The Avocent USBIAC2-10 is a MPUIQ-VMCHS KVM dongle with a built-in 10ft CAT5 cable.
USBIAC2-10 is a direct replacement for part number USBIAC-10
Answer: Thank you for your inquiry. Yes, the single USB connection will carry both keyboard and mouse signals
Question: Does this item work with the DSR 4030 switch?
Answer: Thank you for your inquiry. Unfortunately, no, this integrated cable will not work with the DSR series of KVM Switch. The USBIAC family of integrated access cables is for use with the AutoView series of KVM.
For the DSR series, use the MPUIQ-VMCHS dongle (https://www.kvm-switches-online.com/mpuiq-vmchs.html). The MPUIQ is the direct replacement for the DSRIQ series of dongle.
Question: Do this work with the Avocent 3050 KVM IP Switch
Answer: Thank you for your inquiry. The USBIAC-10 will work with the Avocent AutoView 3050 (AV3050) KVM Switch.
Question: Does this item work with DMPU2016 KVM switch?
Answer: Thank you for your inquiry. The USBIAC-10 is designed for use with Avocent AutoView KVM switches and would not be supported for use with the Avocent MergePoint series or non-Avocent KVM Switches. Pin-outs can very between different KVM families and between different manufacturers, so it is best to use the original manufacturer's parts.